Comments on: PMP Mod M4g3

By: Administrator

Administrator — Tue, 30 May 2006 10:06:01 +0000

fixed the dl link.

By: sparkY

sparkY — Mon, 29 May 2006 21:56:39 +0000

archives seem to be corrupted?

By: Administrator

Administrator — Sat, 22 Apr 2006 15:35:06 +0000

Thx for the 2.0 version. I was waiting for gui version which is 2.0 based. Will port the networkcode the next days…

By: ak

ak — Fri, 21 Apr 2006 18:49:55 +0000

Hello
Can u add a network support with the last version of PMP mod (version 2.0)?
Here is the best 2.0 version (with same graphic interface and zoom function that version 1.2 ) :
http://rapidshare.de/files/17591044/pmpmod200mm2.zip.html

Thanks for all your works.

By: Administrator

Administrator — Fri, 31 Mar 2006 10:45:40 +0000

Some tips:

o Stay close to AP
o Reduce noise around AP
o Try to switch channel on the AP
o Update firmware on the AP
o Update wlan driver on the desktop computer
o Watch computer cpu load and try to reduce this
o Watch computer io load adn try to reduce this
o Try to deactive WEP on the AP and PSP

By: james

james — Thu, 30 Mar 2006 19:28:24 +0000

still stutter for me, even with power save OFF, even with lower bitrates, of course it dos not lagg so much but anyone else has an idea ?

By: Amz

Amz — Wed, 22 Mar 2006 07:28:56 +0000

Hi! I got it today and got frustrated when it didn’t work… but after a few retries I managed to get it to work!!! (if you get the could not read header error under windows)

It’s very easy… I first noticed that the search path the script ended using was “/movies” instead of “c:\movies”… so I changed BOTH to “c:\movies” so it could find my PMP’s. They were listed in the PSP but they didn’t work. HOWEVER, what’s the problem here? That the script DOESN’T detect i’m on a windows platform, so I searched for more IF’s that checked this and found another one, so I COMMENTED it. Since I don’t know Python at all, it didn’t work.. so wtf… well it was just a matter of syntax, the line below the second “if its a windows platform” had to be at the same level as the other lines heh (spaces and tabs).

Well too much for a story, locate this:

    net_fd = FileIOServer.__fd_max
    if platform.system() == 'Windows':
        flags |= os.O_BINARY

change to this:

    net_fd = FileIOServer.__fd_max
    #if platform.system() == 'Windows':
    flags |= os.O_BINARY

notice “flags” is aligned with “net blabla”

GL!

By: Pete

Pete — Sat, 18 Mar 2006 13:09:44 +0000

Slight problem, had a look at the output from the python server script, when the PSP requests a directory listing the server reports 1 file found, but on the psp im being told that there are 0 files.

Any ideas?

By: lame

lame — Mon, 13 Mar 2006 09:56:23 +0000

Hi,
what kind of framerates are used.
I am using 25 frames/s (PAL) and never get a film viewed without stuttering.
I am using 512Kbit Video and 128Kbit Audio.
Also tested with lower video rates.
All server plattforms tested (Windows/Linux) only the command line is not tested at time.

Fine work

THX

By: bkeny01

bkeny01 — Fri, 10 Mar 2006 16:58:03 +0000

Everything works fine, the server is seen and the files on my computer are seen but when i try to run a pmp file i get an error code like this on the server running on windows python,

[192.168.blah.blah] code 400, messgae Bad request syntax ("GET /open?filename=Land of the Dead.pmp&flags=0RDONLY HTTP/1.1') [192.168.blah.blah] "GET /open?filename=Land of the Dead.pmp&flags=0RDONLY HTTP/1.1" 400 -

And this error on the PSP screen,

Error:

"pmplibopen: can't open file"

Press X

I dont suppose anyone cant give an an idea what is going wrong could they ?

Thank you in advance.